 |  |
Fit: 4.0 of 5 |
 | |
Finish: 3.0 of 5 |
| |
Function: 4.0 of 5 |
 | |
Performance: 3.7 of 5 |
| | | See Review for comments.MX Series : Toyota Tacoma
March 14, 2012 Posted by: Roger Rabbit
When I got home from the business I purchased the topper from it had slid back about a 1/2" on the drivers side portion of the pickup bed rails. I disassembled the mounting brackets and the allen head screws had come loose on all four brackets used to hold the bracket to the stock bed rail tie downs. I drilled the holes out with a 5/16th bit (because the bolts had created threads on the bracket and I had to screw out the allen head bolts from the bracket) and reassembled the bracket to the truck bed rail. I then used the Toyota stock tie down clamps and installed one in each front corner of the bed to prevent the cap from sliding backwards again if the brackets work loose again. Upon closer inspection of the topper the interior carpet is not completely attached, sticking, glued) to the front upper portion of the topper where it rises. The rest of it appears to be good craftsmanship, but time will tell in that regard!
| 32767 Found This Review Helpful | |
[ Read all Roger Rabbit's Reviews ]
|
